<![CDATA[
<H1>Daiwa reels</H1>
<H2>Multiplier Reels</H2>
<H3>Daiwa, SLOSH, Millionaire, 7HT, 7HT turbo, 7HT Mag, Saltist, Saltiga</H3>
<H4>Daiwa Firewolf Multipliers</H4>
They are built around a solid one piece frame Firewolfs are incredibly versatile delivering the ability to cast
and fish downtide with ease. Featuring a level wind, good line lay comes as standard, and during line release
the guide remains engaged, following the travel of the line as it comes off the spool.
Versatile multi function performance
Solid one piece frame
Machine cut brass gears
Teflon assisted drag system
High power winding
Stainless steel side plate and ring
Audible spool click
Gear ration 4.0:1
<B>Daiwa Firewolf 27H</B> ideal for shore and light uptide work
Line capacity 410m of 12lbs
RRP is £64.99
<B>Daiwa Firewolf 47H</B> ideal for light boat and uptide work.
Line capacity 275m of 30lbs
RRP is £69.99
<H4>Daiwa Millionaire 7HT</H4>
The first and original open frame multiplier designed to meet the exacting criteria of the demanding tournament casting
circuit and the discerning UK beach angler. "The all round match anglers' choice","A dream to cast." It's the
genuine article; the <EM>7HT</EM> verged on design perfection hence it has remained at the top, unsurpassed.
Rigid one-piece duraluminium frame.
Daiwa five point support system and low-frame crossbars.
Aluminium/bronze gears with centrifugal anti-backlash control.
Mechanical brake system with two sizes of blocks provided.
6.1:1 retrieve with three stainless steel ball bearings.
Lightweight anodised aluminium spool.
Smooth and powerfull star drag.
Recommended Retail Price - £125.00
<H4>Daiwa Millionaire 7HT Turbo</H4>
'Faster, smoother and further.' That was the design breif for Daiwa's reel engineers in Japan when they decided
it was time to take the <B>Millionaire</B> to another level. After intensive trials it became apparent that what
the engineers eventually created undoubtedly ticked all the boxes and when testedboth across grass and with bait,
the new <EM>7HT Turbo</EM> produced truly outstanding results. Utilising the familiar profile and 'open-frame' access
is maintained. What hsa been enhanced to an amazing level is the freedom of the spool rotation achieved through the
innovative Free-floating spool system. Unlike other reels, where the pinion gear constantly rides the spool shaft,
Daiwa's unique system floats the spool independantly on precision, stainless steel bearings. Because the pinion rides
on its own separate shaft, the spool spins freely, unhampered by gear friction. Assisting this spool speed even further
are five bearings including four CRBB's. The resultis an extended level of rotationand improved ease of distance,
Sporting a bold colour scheme of red and gold the all new Turbo will certainly live up to its rcay appearance.
Free-floating spool system
Five bearings including four CRBB's
Rigid one-piece duraluminium frame.
Daiwa five point support system and low-frame crossbars.
Aluminium/bronze gears with centrifugal anti-backlash control.
Mechanical brake system with two sizes of blocks provided.
5.2:1 retrieve.
Lightweight anodised aluminium spool.
Smooth and powerfull star drag.
Recommended Retail Price - £165.00
<H4>Daiwa Millionaire 7HT Mag</H4>
Magnetism like you will never have seen before is at the heart of the new <B>Daiwa 7HT Mag</B>. By creating a magnetic control
system that is able to adjust itself during the cast gives you the ultimate form of brake control any angler could wish for.
It is called Magnofuge. Allowing the spool to hit maximum speed at the beginning of the cast Magnofuge kicks in almost
instantly. As the reel detects the centrifugal force of the spool reducing it activates minute and gradual adjustment
to the magnetic resistance, but in perfect synchronicity with the speed of the spool. Straight from the box again the
latest <EM>7HT Turbo</EM> is ‘cast ready’ and thanks to the wide range of magnetic settings available through easy grip,
CNC machined dial you can tailor the range to suit any condition. On the winding front the <B>7HT Mag</B> offers a swift
ratio of 5.8:1, six ball bearings of which five are CRBBs and an improved handle size and grip.
Features
Magnofuge - intelligent magnetic braking
6 bearings including 5 CRBBs
Rigid one-piece duraluminium frame
Infinite Anti-Reverse
Improved power handle
Lightweight anodised aluminium spool
Daiwa five-point support system and low-frame crossbars
High grade brass drive gear
Stainless steel pinion gear
Smooth and powerful star drag
Retrieve Ratio 5.8:1
Line Capacity 300m / 15lb
6 ball bearings of which 5 are CRBBs
RRP is £199.00
<H4>Daiwa Sealine SL20SH & SL30SH, "Slosh 20 & Slosh 30" Multipliers</H4>
The <B>SL20SH</B> and <B>SL30SH</B> have such a cult following amongst sea anglers that the have nicknamed the pair.
They are incredibly strong and their smoothness is a testimony to their superior build quality.
Four ball bearings for totally smooth operation and superior winding power.
Five-point support frame.
Lightweight, but extra strong anodised aluminium spool.
Multi-washer supersmooth drag system.
Counter balanced handle, adjustable for increased leverage.
Rod clamp supplied.
Recommended Retail Price - £125
<H4>Daiwa Sealine Sealine ‘SLOSH’ XA</H4>
Power, speed and distance are all available in the shape of these new <B>Daiwa Sealine X</B> multipliers. Incredibly
free running thanks to the innovation of Speed Shaft their ‘free floating spool’ detaches from the gear and spins on
its own shaft and dedicated bearings. The 20 and 30 are made for the shore, distance work with even heavyweight gear
and at sea where the ground is rough. Topping the range is the 40 with a mammoth crank rate of 114cm of line per handle
turn and will be the match of any Tope or fast diving Pollack. All models offer a swift 6.1:1 retrieve, host 3 CRBBs and
have a waterproof drag.
Features
• Super Speed Shaft
• Selectable, centrifugal braking
• 3 CRBB bearings
• Retrieve Ratio 6.1:1
• Waterproof high performance drag
• Super-strong aluminium spool
• Strong, lightweight composite frame and side plates
• Balanced aluminium handle
• Steel rod clamp included
<B>Daiwa SLX20SHA</B>
Line capacity 320m/15lb
RRP - £170.00
<B>Daiwa SLX30SHA</B>
Line capacity 270m/20lb
RRP - £180.00
<B>Daiwa SLX40SHA</B>
Line capacity 365m/25lb
RRP - £190.00
<H4>Daiwa Saltist</H4>
Described as having a "full metal jacket" the <B>Daiwa Saltist</B> multipliers do indeed benefit from an all metal construction,
ridget one piece aluminium frame and side plates. Designed to withstand the heavy loads of todays super braids,
<EM>Daiwa Saltist</EM> reels deliver true workhorse levels of power and durability. The combination of ridged drive train
support and precisely designed gear ratios give these reels a serious advantage in both toque and speed. They not only pull
in over a yard of line with every turn of the handle turn, winding power is up 30% than similar reels. Four ball bearings
and a roller bearing add efficiency to the drive train support, with Daiwa's special CRBB corrosion resistant ball bearings
supporting the spool. However the Saltist reels are not reserved for down tiding alone.
Fitted with centrifugal brakes each reel is ideal for uptiding powerful shore work. The drag is also beefed up, combining
stainless and grease impregnated fibre washers in a wet system that delivers up to 22% greater drag max than similar reels.
The range includes three super High Speed versions, retrieving at 6.4:1 recovering almost 1.2m per handle turn.
<B>Daiwa STT40</B> 4.9:1 365M-25LB..... RRP £140.00
<B>Daiwa STT50</B> 4.9:1 320M-30LB .... RRP £ 145.00
<B>Daiwa STT30TH</B> 6.4:1 275M-20LB.... RRP £140.00
<B>Daiwa STT40H</B> 6.4:1 365M-25LB.... RRP £ 145.00
<B>Daiwa STT50H</B> 6.4:1 320M-30LB.... RRP £150.00
<H4>Diawa Saltiga</H4>
The <B>Daiwa Saltiga</B> name has become synonymous with in reel engineering, delivering previous unreachable levels of
performance and durability in a reel. Originally designed to maximise the output from modern braid; an approach today which
lets you pack a tremendous amount of fighting power onto a relatively small reel. However, it also puts an incredible strain
on gear trains and drags that were previously designed for monofil.
Thats why <B>Daiwa</B> designed <B>Saltiga</B> from the start with beefed up components held in perfect alignment by a
super-ridgid frame to reduce wear and efficiently transfer winding power. The frame and side plates are cut by some of
the worlds most advanced machining equipment from solid, aircraft-grade aluminium bar stock. For reliability, the anti-reverse
is a dual system, combining an infinite anti-reverse bearing with a heavy gauge pawl mechanism. The reel action is assisted
buy seven bearings and to top it all off, a massive, grease impregnated graphite drag provides a full range of super
smooth control to prevent break offs while taking full advantage of the braided line's strength. The <EM>Daiwa Saltiga</EM>
line up starts with the compact <B>SA20</B>. Ideal for shallow water wrecks, light line drifting for bass and the fast and
furious world of pollacking, it can hold 400yds of 30lb braid. On thr top side the <B>SA50</B> quite simply delivers maximum
guts and enormous braid capacity carrying 840yds of 40lb braid. Deep water, very big fish; whatever swims out there the
<EM>SA50</EM> will take it.
<H4>Daiwa Motor Driven Multiplier TANACOM</H4>
The <B>Daiwa Tanacom</B> Multipliers offer a feast of intelligent, electronic features as well as ‘Power Assist’ making
your fishing trip entirely more enjoyable. A down tiding multiplier first each reel can be operated in the same manual
fashion as any other. The main difference is when you connect it to your power source it opens up a whole new world.
Able to retrieve and release line at the touch of a button as well as measuring the depth, they also have a feature like
no other; Power Lever. This application gives you instant, variable control of the retrieve speed and level of power at
your finger tips. Unlike other designs on the market this is a seamless increase or decrease of power just like the
accelerator in your car. You can easily programme the reel to jig a lure or bait by itself across a variation of four
jigging sequences including one random, controlling the length of interval and depth of zone. When dropping your rig down,
you can stay in touch with the depth that the fish are feeding by reading the depth identified on the LCD panel. An alarm
will sound when the chosen depth is reached. This alarm can also be employed to warn you when your retrieved rig is
nearing the surface.
Available in three sizes for use home and abroad the latest model the <B>Daiwa Tanacom 500S</B> will cover all conventional
styles of boatwork. The <B>Hyper Tanacom 600FE</B> will happily accommodate 500m of 60lb PE Braid while the larger
<B>Tanacom Bull 1000</B> will swallow 800m of 80lb PE Braid. Utilising a 12V DC power source or leisure battery each reel
is easily connected thanks to the easy to use power cables supplied with each model.
Features
Daiwa’s unique Power Lever for instant control of winding speed and power
Digital read out measures line amount released and retrieved
Programmable alarm for depth indication and rig proximity on retrieve
Totally sealed micro processor
Totally manual winding option
Programmable jigging function
Battery connection cables supplied
Sealable power socket
Washable design
Model <B>T500S</B>
Retrieve ratio 3.6:1
2 Ball Bearings
Line Capacity 230m-25lb (mono) 470m-40lb (braid)
RRP £399
Model <B>T600</B> (main picture)
Retrieve ratio 2.3:1
8 Ball Bearings
Line Capacity 290m-25lb (mono) 500m-60lb (braid)
RRP £599
Model <B>T1000</B>
Retrieve ratio 2.3:1
4 Ball Bearings
Line Capacity 440m-40lb (mono) 800m-80lb (braid)
RRP £699
]]>
